| 是否进口：否 | 产地：台湾 | 厂家(产地)：台湾新光 |
| 牌号：DH7200 | 销售方式：品牌经销 | 类型：标准料 |
| 品名：TPEE | 加工级别：注塑级 | 特性级别：增强级、 热稳定性、 耐高温、 耐磨、 耐老化 |
| 用途级别：电线电缆级 | 品牌：新光 |
Unit Test Method Values
Mechanical properties 機械性質
Izod Impact(Notched) 衝擊強度Kg-cm/cm ASTM D256 NOT BREAK
Tensile Strength at Yield 降伏強度Kg/cm2 ASTM D638 230
Tensile Strength at Peak 拉伸強度Kg/cm2 ASTM D638 > 380
Nominal Tensile Strain at Break 拉伸率% ASTM D638 > 410
Flexural Strength 彎曲強度Kg/cm2 ASTM D790 272
Flexural Modulus 彎曲模數Kg/cm2 ASTM D790 5559
Hardness (Shore D) 蕭氏硬度- ASTM D2240 72
Thermal properties 熱 性 質
Heat Deflection Temperature 熱變形溫度ASTM D648
66psi °C -
264psi °C -
Flammability 防火性 - UL94 HB
Melting Point 熔點°C DSC 218
Melt Index 230°C/2.16Kg 熔融指數g/10min ASTM D1238 18
Electrical properties 電氣性質
Dielectric Strength 介電強度KV/MM ASTM D149 27
Dielectric Constant 介電常數… ASTM D150 -
Volume Resistivity 體積電阻Ω-CM ASTM D257 1.00E+16
Other properties 其它性質
Specific Gravity 比重 - ASTM D792 1.26
Water Absorption 吸水率% ASTM D570 0.5
Mold Shrinkage 成形收縮率ASTM D955
Flow 流動方向% 1.5
Cross Flow 垂直方向% 1.5
Injection Molding 成型條件
INJECTION MACHINE 成型機台OZ 3
DRYING 乾燥4-5 HR × 80 (℃)
BARREL TEMPERATURE 成型溫度°C
REAR 210-220
MIDDLE 220-230
FRONT 230-240
NOZZLE 240-245
MOLD TEMPERATURE 模溫°C 50-70
INJECTION PRESSURE 射出壓力kg/cm2 600-1000
INJECTION SPEED 射出速度- FAST
以上數據僅供參考，實際數據以產品出廠檢驗報告為準
Data listed above is for reference. The actual quality of certain batch is varied within a specific range, as indicated in each COA.
此塑料規格獲得UL防火認證，並經第三公正檢測單位檢驗通過RoHS和SVHC法規，歡迎至新光網站或來信查詢檢測報告
